Description
The O2 sensor test is an important component of the MitoFit Quality Control System. The OroboPOS sensor test is described in detail in MiPNet06.03 POS-calibration-SOP, is performed after switching on the O2k, and is required as a basis of technical service of the instrument.
Abbreviation: POS test
Reference: MiPNet06.03 POS-calibration-SOP
MitoPedia concepts: "MitoFit Quality Control System" is not in the list (MiP concept, Respiratory state, Respiratory control ratio, SUIT concept, SUIT protocol, SUIT A, SUIT B, SUIT C, SUIT state, Recommended, ...) of allowed values for the "MitoPedia concept" property.
MitoFit Quality Control System"MitoFit Quality Control System" is not in the list (Enzyme, Medium, Inhibitor, Substrate and metabolite, Uncoupler, Sample preparation, Permeabilization agent, EAGLE, MitoGlobal Organizations, MitoGlobal Centres, ...) of allowed values for the "MitoPedia topic" property.
MitoPedia O2k and high-resolution respirometry:
O2k hardware,
DatLab
MitoPedia O2k and high-resolution respirometry:
O2k-Open Support
- Β» 1. Service and preparation
- Β» 1a. O2k-Manual: POS-service
- Β» 1b. O2k-Protocols SOP: O2k-cleaning
- Β» 2. POS-calibration SOP
- Β» 2a. Stirrer test
- Β» 2b. O2k-Manual: O2k-calibration