Difference between revisions of "O2k-Main Unit"
| Line 1: | Line 1: | ||
{{Product | {{Product | ||
|description=The '''O2k-Main Unit''' is a component of the [[O2k-Core]]. The O2k-Main Unit consists of functionally defined, integral elements, the | |description=The '''O2k-Main Unit''' is a component of the [[O2k-Core]]. The O2k-Main Unit consists of functionally defined, integral elements, the [[O2k-Main Basic]], [[O2k-Peltier Temperature Control]], two [[O2k-Electromagnetic Stirrer Twin-Control]] units, two [[O2k-Amperometric OroboPOS Twin-Channel]]s, [[O2k-Barometric Pressure Transducer]], [[O2k-Fluo Control Unit]], which cannot be obtained separately. | ||
|product id=20000 | |product id=20000 | ||
|product type=O2k-Core | |product type=O2k-Core | ||
Revision as of 16:05, 13 March 2017
O2k-Main Unit
| Description | The O2k-Main Unit is a component of the O2k-Core. The O2k-Main Unit consists of functionally defined, integral elements, the O2k-Main Basic, O2k-Peltier Temperature Control, two O2k-Electromagnetic Stirrer Twin-Control units, two O2k-Amperometric OroboPOS Twin-Channels, O2k-Barometric Pressure Transducer, O2k-Fluo Control Unit, which cannot be obtained separately. |
|---|---|
| Product ID | 20000 |
| Type | O2k-Core |
| Link | O2k-Core |
| Image |
The O2k-Main Unit consists of integral elements, which are not separately available:
| Title | Description | Product id | Product image |
|---|---|---|---|
| DatLab-Upgrading to DatLab 6 | DatLab-Upgrading to DatLab 6: including free follow-up updates for DatLab 6 for the next two years | 27142-01 | |
| O2k-Catalogue: O2k-Modules | 4#### O2k-Catalogue: O2k-Modules. O2k-Modules can be obtained with the O2k or added later, and can be simply installed by the user. | 4#### | 4#### |
| O-ring\Viton\12x1 mm | O-ring\Viton\12x1 mm, for PVDF or PEEK O2k-Stoppers, box of 4 as spares. Two spare boxes of this product are standard components of the O2k-Assembly Kit (O2k-FluoRespirometer) as well as the O2k-TPP+ ISE-Module and the O2k-NO Amp-Module. | Discontinued |  |
| TIP2k-Needle Safety Support | TIP2k-Needle Safety Support: for safe storage of TIP2k-needles when not required during the experiment. This item is a standard component of the TIP2k-Module. | discontinued |  |
O2k-Series
The O2k is continuously developed further to integrate various innovations. While all O2k instruments have the same high standard for measuring respiration, there are differences with respect to:
- Type of stoppers and chamber holders used
- Type of OroboPOS-Connector
- Availability of additional electronic channels for O2k-MultiSensor applications.
The Series of the O2k is specified as the capital letter in the serial number of the O2k, shown on the label on the rear of the O2k-Main Unit (MiPNet19.18A O2k-start). A serial number B-xxxx or C-xxxx denotes O2k-Series B or C, while G-xxxx denotes an O2k-Series G.
With DatLab operating connected to the O2k, the serial number of the O2k is displayed:
- in the right corner of the status line, besides the DatLab version number (bottom).
- in the window caption of the O2k-Control window [F7].
Support of O2k-Modules
The O2k (Series E) and higher support all modules. O2k (Series A-D) require the O2k-MultiSensor electronic upgrade. An exception is the application of an NO sensor in a single chamber of the O2k-series A to C.
