O2k-Catalogue: O2k-Assembly Kit

From Bioblast
(Redirected from O2k-Assembly Kit)
Jump to: navigation, search

Oroboros Instruments

News         O2k-Products         O2k-Purchase         O2k-Open Support         O2k-Publications         O2k-Workshops and Events         O2k-Network         O2k-Feedback         NextGen-O2k



O2k-Catalogue: O2k-Assembly Kit

O2k-Catalogue

Description 21### O2k-Assembly Kit: The O2k-Assembly Kit is a component of the O2k-FluoRespirometer, consisting of 2 PVDF Stirrer-Bars, 2 PVDF or PEEK O2k-Stoppers, OroboPOS-Connectors (attached to the O2k-Main Unit) and cables (power supply, USB-connection). Several components of the O2k-Catalogue: O2k-Assembly Kit are included in the O2k-Service Box either for shipment or for storage.
Product ID 21###
Type O2k, O2k-FluoRespirometer, Startup-O2k
Link O2k-Assembly Kit
Image 21###


The O2k-Catalogue: O2k-Assembly Kit consists of

TitleDescriptionProduct idProduct image
O2k-Main Power CableO2k-Main Power Cable, either O2k-Main Power Cable\230 V\Europe, O2k-Main Power Cable\120 V\US-CA, or O2k-Main Power Cable\230 V\AU-NZ. This item is standard component of the O2k-Assembly Kit (O2k-Core).21110
O2k-Main Power Cable\230 V\EuropeO2k-Main Power Cable\230 V\Europe. An O2k-Main Power Cable is included in the O2k-Assembly Kit.21111-01
O2k-Main Power Cable 230 V Europe.JPG
O2k-Main Power Cable\120 V\US-CAO2k-Main Power Cable\120 V\US-CA, USA and Canada (120 V). An O2k-Main Power Cable is included in the O2k-Assembly Kit.21112-01
O2k-Main Power Cable 120 V US-CA.JPG
O2k-Main Power Cable\230 V\AU-NZO2k-Main Power Cable\AU-NZ, Australia and New Zealand (230 V). An O2k-Main Power Cable is included in the O2k-Assembly Kit.21113-01
O2k-Main Power Cable 230 V AU-NZ.JPG
USB-Cable 2.0\Type A-BUSB-Cable 2.0\Type A-B for connecting the O2k-Main Unit (O2k-Series E upwards) to the USB port of a PC or laptop. This item is a standard component of the O2k-Assembly Kit (O2k-FluoRespirometer).21230-01
USB-Cable2.0 Type A-B.JPG
O2k-Fuse Power Plug\M2.5 A\5x20 mmO2k-Fuse Power Plug\M2.5 A\5x20 mm: This item is a standard component of the O2k-Assembly Kit (O2k-FluoRespirometer), mounted on the socket for the O2k-Main Power Cable, at the rear panel of the O2k-Main Unit.22510-01
Fuses mains.jpg
O2k-ChamberO2k-Chamber: 16 mm inner diameter, Duran glass polished, with standard operation volume (V) of 2 cm3 (2 mL). Two units of this item are standard components of the O2k-FluoRespirometer. Separate glass chambers are available as spares. The optical properties of Duran allow application of fluorometric sensors (Duran optical properties).23100-01
Glass chamber.jpg
Stirrer-Bar\white PVDF\15x6 mmStirrer-Bar\white PVDF\15x6 mm, operated in the O2k-Chamber at constant stirring speed (standard is 750 rpm, or 12.5 Hz), to provide optimum mixing of the sample in the aqueous medium and ensure a stable signal of the polarographic oxygen sensor (OroboPOS) placed in a position of maximum current of the medium.


Two units of this item are standard components of the O2k-Assembly Kit (O2k-FluoRespirometer).

O2k-FluoRespirometer: 2 in O2k-Assembly Kit.
23210-01
Stirrer bar PVDF.jpg
Stopper\black PEEK\conical Shaft\central PortStopper\black PEEK\conical Shaft\central Port: with conical shaft and one central capillary (with PTFE, graphite, carbon fiber), Volume-Calibration Ring (A or B) for volume adjustment 1.5 to 3.2 ml; 2 mounted O-rings, with 8 spare O-rings (O-ring\Viton\12.5x1 mm). The black PEEK stoppers are required for optical O2k-MultiSensor Modules (O2k-Fluo_LED2-Module). Two units of this item are standard components of the O2k-Assembly Kit.24000-01
Stopper black PEEK conical Shaft central Port.JPG
O-ring\Viton\12.5x1 mmO-ring\Viton\12.5x1 mm, for PVDF or PEEK O2k-Stoppers, box of 8 as spares. Two spare boxes of this product are standard components of the O2k-Assembly Kit (O2k-FluoRespirometer) as well as the O2k-TPP+ ISE-Module, O2k-pH ISE-Module and the O2k-NO Amp-Module.24310-02
O-ringViton12.5x1 mm.jpg
Cover-Slip\blackA Cover-Slip should be placed on top of the O2k-Stopper to minimize contamination and evaporation of liquid extruding from the capillary of the stopper. The Cover-Slips do not exert any direct effect on oxygen backdiffusion into the O2k-Chamber. Use the the Cover-Slip\black to avoid light penetration and disturbance of fluorescence signals and generally for optical measurements in the O2k. Two units of this item are standard components of the O2k-Assembly Kit.24411-01
Cover-Slip black.JPG
Stopper-SpacerStopper-Spacer (or gas spacer) to set the O2k-Stopper into a standard position for a fixed gas phase above the aqueous phase in the O2k-Chamber, during air calibration or for injection of nitrogen, argon or oxygen into the gas phase; Stopper-Spacer thickness of 4mm (a deviation of +/- 10% possible). One Stopper-Spacer is included in the O2k-Assembly Kit (O2k-FluoRespirometer), two in the O2k-TPP+ ISE-Module as standard components.24420-01
Gas spacer for Stopper.jpg
Syringe\60 ml\Gas-InjectionSyringe\60 mL\Gas-Injection, 60 mL, with spacer and stainless steel needle, flat tip, for gas injection into the O2k-Chamber. This item is a standard component of the O2k-Assembly Kit.24430-01
Gas injection syringe.jpg
O2k-Service BoxO2k-Service Box empty, contains components of the OroboPOS-Service Kit and the O2k-Assembly Kit.26101-03