User talk:Sigl Reinhard/My sandbox Videosupport

                  

---

User talk:Sigl Reinhard/My sandbox Videosupport

---

Complementary to the O2k-Manual, the O2k-Videosupport provides valuable assistance.

This cannot replace a careful study of the O2k-Manual.

O2k-start (DatLab 7/Series H)

MiPNet22.11 O2k-FluoRespirometer manual

A1 Insert O2k-Chamber

• New: O2k-Series H is delivered with the O2k-Chambers mounted. Therefore, mounting is only necessary after removing the glass chamber for a full cleaning service. This is required for regular cleaning the glass chamber.

A2 Insert OroboPOS

A3 O2k-Chamber volume calibration

• New: O2k-Series H is delivered with volume-calibrated O2k-Chambers. Therefore, volume calibration is only necessary for specific stoppers of the O2k-TPP+ ISE-Module, the O2k-pH ISE-Module, and the O2k-NO Amp-Module.

A4 O2k ready to use

O2k-start (DatLab6/Series G)

MiPNet19.18A O2k-Series G: Start

A1 Insert O2k-Chamber

• New: O2k-Series H is delivered with the O2k-Chambers mounted. Therefore, mounting is only necessary after removing the glass chamber for a full cleaning service. This is required for regular cleaning the glass chamber.

A2 Insert OroboPOS

A3 O2k-Chamber volume calibration

• New: O2k-Series H is delivered with volume-calibrated O2k-Chambers. Therefore, volume calibration is only necessary for specific stoppers of the O2k-TPP+ ISE-Module, the O2k-pH ISE-Module, and the O2k-NO Amp-Module.

A4 O2k ready to use

POS-service (All Series)

MiPNet19.18B POS-service

B1 OroboPOS from Perspex housing

B2 Disassembly of OroboPOS

B3 Cathode cleaning

B4 Anode cleaning

B5 Membrane mounting