Difference between revisions of "Cover-Slip\black"

Revision as of 10:19, 28 October 2020

Cover-Slip\black

MitoPedia O2k and high-resolution respirometry: O2k-Open Support

Description

A Cover-Slip should be placed on top of the O2k-Stopper to minimize contamination and evaporation of liquid extruding from the capillary of the stopper. The Cover-Slips do not exert any direct effect on oxygen backdiffusion into the O2k-chamber. Use the the Cover-Slip\black to avoid light penetration and disturbance of fluorescence signals and generally for optical measurements in the O2k.

Technical support

Cover-Slips cannot be placed on top of the stoppers in O2k-MultiSensor applications with additional sensors inserted through the stopper, or while TIP2k needles are inserted into the O2k-chamber.
The black cover-slips replaced the previous perspex Cover-Slips (Product ID 24410-01). They are functionally identical, but the black cover slips take into account the optical properties of the O2k-Fluorometer and prevent light from penetrating through the capillaries of the stoppers when using optical sensors.

Keywords

»Bioblast links: Chamber volume - >>>>>>> - Click on [Expand] or [Collapse] - >>>>>>>

» Volume

Units: Liter [L]; 1 L = 1 dm³ = 10^-3 m³; 1 mL = 1 cm³; 1 µL = 1 mm³

» O2k-chamber

» The experimental chamber in the instrumental O2k-Chamber

» O2k-Chamber sV

» Calibration of O2k-chamber volume

On chamber volume

» O2k-chamber

» Chamber volume

» MiPNet09.01 O2k-ParadigmShift

» Cell count and normalization in HRR

» Open chamber

» Closed chamber

Components of the experimental O2k-chambers

» Stirrer-Bar\white PVDF\15x6 mm

» Stirrer-Bar sV\white PVDF\11.5x6.2 mm

» Stopper\black PEEK\conical Shaft\central Port

» Stopper sV\black PEEK\conical Shaft\central Port

» O-ring\Viton\12.5x1 mm

» O-ring sV\Viton\9.5x1 mm

» Volume-Calibration Ring

» Volume-Calibration Ring sV

» Stopper-Spacer

» Cover-Slip\black

» O2k-Chamber Holder

» O2k-Chamber Holder sV

» OroboPOS-Holder

» OroboPOS-Holder sV

Maintencance

» O2k-cleaning and ISS

» Quality control: O2k-chamber test

MitoPedia O2k and high-resolution respirometry: O2k hardware, O2k-Open Support, O2k-Respirometry, O2k-FluoRespirometry

@@ Line 5: / Line 5: @@
 |description=[[Image:Cover-Slip_black.JPG|180px|right]] A '''Cover-Slip''' should be placed on top of the O2k-Stopper to minimize contamination and evaporation of liquid extruding from the capillary of the stopper.  The Cover-Slips do not exert any direct effect on oxygen backdiffusion into the [[O2k-chamber]]. Use the the '''Cover-Slip\black''' to avoid light penetration and disturbance of fluorescence signals and generally for optical measurements in the O2k.
-Two units of this item are standard components of the [[O2k-Assembly Kit]].
 }}