|
ย |
(20 intermediate revisions by 9 users not shown) |
Line 1: |
Line 1: |
| {{Product | | {{Technical support}} |
| |description=The '''O2k-Main Unit''' is a component of the [[O2k-Core]]. The O2k-Main Unit consists of functionally defined, integral elements, the ([[O2k-Main Basic]], [[O2k-Peltier Temperature Control]], two [[O2k-Electromagnetic Stirrer Twin-Control]] units, two [[O2k-Amperometric_OroboPOS_Twin-Channel]]s, [[O2k-Barometric Pressure Transducer]]), which cannot be obtained separately. | | __TOC__ |
| |product id=20000
| | {{MitoPedia without banner |
| |product type=O2k-Core
| | |abbr= |
| |info=[[O2k-Core]] | | |description=The '''O2k-Main Unit''' is a component of the [[O2k-Core]]. The O2k-Main Unit consists of functionally defined, integral elements, the ([[O2k-Main Basic]], [[O2k-Peltier Temperature Control]], two [[O2k-Electromagnetic Stirrer Twin-Control]] units, two [[O2k-Amperometric OroboPOS Twin-Channel]]s, [[O2k-Barometric Pressure Transducer]]), which cannot be obtained separately. |
| | |info=[[Oroboros O2k]] |
| }} | | }} |
| | |
| | |
| | __TOC__ |
| | |
| The '''O2k-Main Unit''' consists of integral elements, which are not separately available: | | The '''O2k-Main Unit''' consists of integral elements, which are not separately available: |
| {{#ask: mainlabel=Title|[[Category:Products]] | [[Product type::O2k-Main Unit]] | | {{#ask: [[Category:Products]] [[Product type::O2k-Main Unit]] |
| | ?description | | | ?description |
| | ?product id | | | ?product id |
Line 12: |
Line 17: |
| |sort=product id | | |sort=product id |
| |order=ascending | | |order=ascending |
| | |mainlabel=Title |
| }} | | }} |
|
| |
|
| __TOC__
| | == O2k series and support of O2k-Modules == |
| | ::::ยป [[O2k series]] |
|
| |
|
|
| |
|
| == O2k-Series ==
| | {{MitoPedia O2k and high-resolution respirometry |
| The O2k is continuously developed further to integrate various innovations. While all O2k instruments have the same high standard for measuring respiration, there are differences with respect to:
| | |mitopedia O2k and high-resolution respirometry=O2k hardware, O2k-Open Support, O2k-Respirometry, O2k-FluoRespirometry |
| * Type of [[Catalogue O2k-Stoppers|stoppers]] and [[O2k-Chamber Holder|chamber holders]] used
| | }} |
| * Type of [[OroboPOS-Connector]]
| |
| * Availability of additional electronic channels for O2k-MultiSensor applications.
| |
| [[Image:Serial_number_sticker_small.JPG|right|200 px|alt=The serial number of each O2k is shown on a sticker at the rear of the O2k.]]
| |
| The '''Series''' of the O2k is specified as the capital letter in the serial number of the O2k, shown on the label on the rear of the O2k-Main Unit [[MiPNet12.06]].ย A serial number B-xxxx or C-xxxx denotes O2k-Series B or C, while D-xxxx denotes an O2k-Series D.
| |
| ย | |
| ย | |
| ย | |
| ย | |
| [[Image:Serial_number_signal_line.png|right|200 px|alt=On-line the serial number is displayed in the signal line]]
| |
| With DatLab operating connected to the O2k, the serial number of the O2k is displayed:
| |
| ย | |
| * in the right corner of the status line, besides the DatLab version number (bottom).
| |
| [[Image:Serial_number_control_window.png|right|200 px|alt=On-line the serial number is displayed in the window caption of the O2k-Control window.]]
| |
| * in the window caption of the O2k-Control window [F7].
| |
| ย | |
|
| |
| == Support of O2k-Modules ==
| |
| The O2k [[Electronic-TIP2k Upgrading\O2k-Main Unit Series E|(Series E)]] and hgher support all modules. O2k [[Electronic-TIP2k Upgrading\O2k-Main Unit Series A-D|(Series A-D)]] require the [[O2k-Catalogue: O2k-MultiSensor\Electronic Upgrading|O2k-MultiSensor electronic upgrade]]. An exception is the application of an NO sensor in a single chamber of the Series A to C O2k.
| |
| ย | |
|
| |
| == Power supply cable ==
| |
| The O2k is delivered with one of three different types of power supply cables:ย ย ย ย ย
| |
| * US type ([[O2k-Main Power Cable\120 V\US-CA]], 21112-01)
| |
| * European type ([[O2k-Main Power Cable\230 V\Europe]], 21111-01)
| |
| * Australian Type ([[O2k-Main Power Cable\230 V\AU-NZ]], 21113-01)
| |
| ย | |
| Use 21111-01 O2k-Main Power Cable\230 V\Europe (Hybrid German/French plug CEE 7-7. Type E+F) only for compatible socket. Note that some '''Danish''' sockets also accept the CEE7/7 plugs, but there is '''no grounding''' connection with these plugs because a male ground pin is required on the plug.
| |
| ย | |
|
| |
| == Control lights ==
| |
| {{Technical support integrated}}
| |
| {{#set:Technical service=Main unit}}
| |
| After switching on the O2k-Main Unit, the control LEDs on the O2k are illuminated.
| |
| ย | |
| * On the left hand side: the lights should be green.
| |
| * On the right hand side: the 'Comm' light should be yellow (before connection to DatLab) or green (after connection to DatLab during data recording).
| |
| * Left and right stirrer: green (stirrers are on and running at set speed); yellow (briefly the stirrers are accelerating after having been switched on); red (stirrers are switched off).
| |
| ย | |
| Should these lights be unlit, you should exchange the fuse on the rear of the O2k-Main Unit where the power cable is plugged in. A spare fuse is supplied with the O2k in the accessory box ([[O2k-Assembly Kit]]). If the 'Comm' light is red, this indicates an electronic problem.
| |