O2k-Main Unit: Difference between revisions
Beno Marija (talk | contribs) No edit summary |
Beno Marija (talk | contribs) No edit summary |
||
Line 26: | Line 26: | ||
* Availability of additional electronic channels for O2k-MultiSensor applications. | * Availability of additional electronic channels for O2k-MultiSensor applications. | ||
[[Image:Serial_number_sticker_small.JPG|right|200 px|alt=The serial number of each O2k is shown on a sticker at the rear of the O2k.]] | [[Image:Serial_number_sticker_small.JPG|right|200 px|alt=The serial number of each O2k is shown on a sticker at the rear of the O2k.]] | ||
The '''Series''' of the O2k is specified as the capital letter in the serial number (hardware number) of the O2k, shown on the label on the rear of the O2k-Main Unit ([[ | The '''Series''' of the O2k is specified as the capital letter in the serial number (hardware number) of the O2k, shown on the label on the rear of the O2k-Main Unit ([[MiPNet22.11 O2k-FluoRespirometer manual]]). A serial number B-xxxx or C-xxxx denotes O2k-Series B or C, while G-xxxx denotes an O2k-Series G. | ||
Revision as of 14:17, 5 April 2018
O2k-Main Unit
Description | The O2k-Main Unit is a component of the O2k-Core. The O2k-Main Unit consists of functionally defined, integral elements, the (O2k-Main Basic, O2k-Peltier Temperature Control, two O2k-Electromagnetic Stirrer Twin-Control units, two O2k-Amperometric OroboPOS Twin-Channels, O2k-Barometric Pressure Transducer), which cannot be obtained separately. |
---|---|
Product ID | 20002 |
Type | O2k-Core |
Link | Oroboros O2k |
Image |
The O2k-Main Unit consists of integral elements, which are not separately available:
O2k-Series
The O2k is continuously developed further to integrate various innovations. While all O2k instruments have the same high standard for measuring respiration, there are differences with respect to:
- Type of stoppers and chamber holders used
- Type of OroboPOS-Connector
- Availability of additional electronic channels for O2k-MultiSensor applications.
The Series of the O2k is specified as the capital letter in the serial number (hardware number) of the O2k, shown on the label on the rear of the O2k-Main Unit (MiPNet22.11 O2k-FluoRespirometer manual). A serial number B-xxxx or C-xxxx denotes O2k-Series B or C, while G-xxxx denotes an O2k-Series G.
With DatLab operating connected to the O2k, the serial number of the O2k is displayed:
- in the right corner of the status line, besides the DatLab version number (bottom).
- in the window caption of the O2k-Control window [F7].
Support of O2k-Modules
The O2k (Series E) and higher support all modules. O2k (Series A-D) require the O2k-MultiSensor electronic upgrade. An exception is the application of an NO sensor in a single chamber of the O2k-series A to C.